Preslav 83, BG-9700 Shoumen


0888 626 935; stdimpex@stdimpex.com


Tornado duo SME

Build-in toilet cistern for suspended toilet, with frontal activation.

 

ident 13501
art. 5-384-500

Dry mounting build-in element for wall toilet with build-in toilet cistern with frontal activation, build-in height 1150 mm. It is intended for installation into prefabricated walls, as a free-standing element for pre-wall installation in dry mounting, for pre-wall angle installation, and for universal massive installation with in-wall installation


  • prefabricated supporting frame coated with blue lacquer with width of 200 mm
  • toilet cistern cisterns DUO with dual flushing. If the START – STOP button is installed works with single flush START – STOP technique.
  • • High capacity: 6 or 9 l, factory default settings 9 l
  • • Low quantity: 3 or 4.5 l
  • moisture insulation with styrofoam pads installed in toilet cistern
  • two console supporting legs for installation on existing floor adjustable by height (0 – 240 mm)
  • galvanized supporting frames for pre-wall installation adjustable by depth 150 - 220mm
  • two threaded rods with nuts M12 for fixing suspended toilet with axial distance of 180 or 230mm
  • pre-assembled angle valve 1/2'' on the right side of the lid
  • build-in protection for box culvert
  • pre-installed PE wall discharge elbow Ø 90/ Ø 110 × 165 mm
  • Ø 90 mm collar sets
  • fixing material
  • without flushing plates
  • factory default settings of toilet cistern is 9 l and is changed only with regulation of discharge valve for big quantity 6 or 9l, small quantity 3-4,5l is not regulated.
  • fill valve must remain at factory default setting!